SAFETY DECLARATION

SECTION 1 :

Product Name : FIBREGLASS BASIC SURFACING MAT

SECTION 2 :

Composition And Information On Ingredients

1. Monomer
2. Mixture
3. Harmful Substance Content: About 0%.

SECTION 3 :

Hazards Identification HAZARDS
Risky category: Did not haveb the hazards，But if the operation is carelessly Will result in injury to the skin.
Routes of Entry: Skin Contact.
Health effects：Will make skin become itchy
Environment effects: No
Explosion Hazard: Don't explode.

SECTION 4 :

First Aid Measures
INHALATION remove from the scene of exposure to fresh air
SKIN CONTACT: wash copiously with lukewarm soapy water without excessive
Rubbing EYE CONTACT: flush in running water (for at least 10 minutes), and consult a doctor as necessary

SECTION 5 :

Fire Fighting Measures In case of fire, glass fibers are not flammable, are incombustible and don’t support combustion. Only the packaging (plastic film, paper, cardboard, wood) is likely to burn. Binders, in spite of their organic nature, do not burn readily; but can support combustion.
RECOMMENDED EXTINGUISHING MEDIA: water or chemical powder

SECTION 6 :

Accidental Release Measures ENVIRONMENTAL PROTECTION, glass fiber wastes did not emit any significant quantities of dangerous products and they can therefore be considered as Inert Industrial Wastes, or even Common Industrial Wastes.

SECTION 7 :

Handling And Storage.
Handling: The operator must pass through the specialized training, strictly observes the working instruction. Suggestion operator wears mouthpiece and Gloves. Avoid contacting the oxide. When transporting must lightly unload and light packs, prevents package or vessel damage.
Storage: Don't heavy pressure

SECTION 8 :

Exposure controls/personal protection
Engineering Controls: The production line attention spreads the heat, strengthening the airiness.
Suggestion operator wears mouthpiece Hands: Suggestion operator wears Gloves.
Other protection: Prohibiting smoking, eating and drinking in the work area. After the work, please bath and changes clothes. Carries on physical examination before the employment and the regular.

SECTION 9 :

Physical and Chemical properties
Physical State and Appearance: Solid The Tissue have many colors.
Mainly Use: Used extensively in composite material and reinforcing material.

SECTION 10 :

Stability and Reactivity
Stability: If the normal temperature range of use is high, the binders used for glass mat can be slightly degraded by heat in normal high temperature of use。
Hazardous Reactions: Glass veil/mat products are stable and never generate hazardous chemical reactions.

SECTION 11 :

Toxicological Information
Acute Toxicity:not relevant.
Localized Effects:possible temporary irritations.

SECTION 12 :

Ecological Information C and E glass are not biodegradable.

SECTION 13 :

Waste Disposal Depending on local regulations, glass mat wastes can either be considered as inert waste or as common industrial waste.
Notice when wastes handle: Pollution of the environment

SECTION 14 :

Transport Information
Packing Method: Packing by carton (Can packing by pallet)
Packing Notes: When transporting should lightly put and unloads. Please abide by routing run.

SECTION 15 :

Regulatory Information Glass Veil/mat products do not require hazardous product labeling General hygiene and work safety regulations apply

SECTION 16 :

OTHER INFORMATION : References: National related law
Explanation : The above information details are based on the manufacturer of Glass Fibre Veil/Mat and the information provided are correct. It is the user’s obligation to determine the conditions for safe use of products.

B) SAFETY DESCRIPTION GLASS FIBRES 90% by weight Glass Fibres are 'C' or Chemical Glass composition as per International Description. All Glass Fibres are Inert, Inorganic , Non Toxic,Odourless , Non-Carcinogenic , Non flammable, Do Not support Organisms or Vermin. THUS THEY DO NOT CAUSE ANY FIRE CHEMICAL,TOXIC,INFECTION HAZARDS. DYE/STAINER (COLOUR) Consists of Inorganic Pigments made from Synthetic Chemicals. These are dispersed in an Acrylic Binder with suitable Catalyst & suitable Solvents.

The Pigment/Binder Dyes are transfered to the Fibreglass Designed Texture by a special transfer technology & are cured or Polymerised in an oven at 150 degree C, when cross linking of the polymeric compound takes place & the solvents are also evaporated off. Thus the dyes are also Non-Reactive , Non-Hazardous & Fire Proof. They do not support Vermin & Micro-Organism & are Stable to Sunlight. Similar dyes are used in Textile Printing hence they have to be Non Hazardous to Skin Contact also. IN CONCLUSION EVERY CONSTITUTENT IN THIS PRODUCTS IS FIT FOR HUMAN CONTACT; FIRE PROOF; ROT PROOF; NON "INFECTION CAUSING" ETC.